Price List
Full Service (Assisted Booking)
- Full service for academia (including the Academia Sinica): The technical service fee is charged at 10% of the list price for the academia*10%.
- Full price user (e.g. vendors/industry community/non-academia): Charged at 100% of the list price.
Booking
- Educational chip users: The discount is 100%, and there is no additional charge.
- New professor discount: New professors that have served less than two years are entitled to the 100% discount, i.e., there is no additional charge.
- NARLabs users: NARLabs (National Applied Research Laboratories) users are entitled to the 100% discount, i.e., there is no additional charge.
- Full price users (by vendors/industry community/non-academia) are charged at 100% of the list price.
User Self-service
User self-service by academia: Charged at 10% of the list price.Remark
- Full Service (Assisted booking)： Measurements are performed by engineers, and the measurement time is scheduled after communicating with customers about their measurement plans.
- Self-booking：Measurements are performed by trained and qualified student part-timers. Customers make bookings online. After their measurement plans are reviewed (not required if not requested), the measurements are performed at the time selected by the customers.
- Self-service：After going through training in accordance with the TSRI’s self-service training and obtaining permission to use instruments, you may operate the instruments within the scope of the permission.
Notes
- If the full service time is less than half an hour (30 minutes), it is counted as half an hour.
- 0.5- 2 hours (0.5 hour for standard calibration; 2 hours for creating a waveguide pattern, subject to the creation conditions) must be added to the full service time for operating general instruments, depending on situations. However, high-frequency noise/power measurement using Focus and Maury, the measurement of high-frequency circuits above 140 GHz, and other customized measurements require up to 6 additional hours for preparations (the time for preparations such as customized creation and calibration will vary, depending on the scan range and point density for the power or frequency measurement). The time for preparations will be estimated and communicated to customers after receiving their full service requests.
Relevant Links
- Equipment Status
- User self-service Procedure and Method
- Equipment Measurement Booking Syetem
- Billing System
| No. | Equipment |
Fee (NTD/h) |
|---|---|---|
| HF-201 | Chip Photo | 125 |
| HF-202 | Wire Bonder SUB668 | 125 |
| HF-203 | Laser Cutter | 300 |
| HF-204 | Oscilloscope (Lecroy LT584) | 125 |
| HF-M01 | MEMS Measurement System | 1,800 |
| HF-P01 | High Frequency, High Speed Photonic Integrated Circuit (PIC)/ Electronic Integrated Circuit (EIC) Measurement System | 11,000 |
| HF-P02 | Silicon Photonics Optical Measurement System | 3,900 |
| HF-S01 | Advantest V93000 PS1600 Automatic Test System | 4,500 |
| ST-201 | Advanced Analog Measurement System | 2,000 |
| ST-301 | Programmable Compact Temperature & Humidity System | 125 |
| ST-302 | Al Wire Bonding | 125 |
| ST-303 | PCB Prototyping Machine | 125 |
| ST-304 | Chip Image Capture System | 125 |
Common RFICs and Antennas
| No. | Equipment |
Fee (NTD/h) |
|
|---|---|---|---|
| HF-101 | 40GHz Measurement System | On PCB | 2,700 |
| On Wafer | 3,600 | ||
| HF-102 | 67GHz Measurement System | On PCB | 3,600 |
| On Wafer | 4,500 | ||
| HF-103 | Signal Source Parameter Measurement System | On PCB | 2,100 |
| On Wafer | 3,000 | ||
| HF-101 | Modulation Signal Measurement System (40GHz System) | On PCB | 2,700 |
| On Wafer | 3,600 | ||
| HF-102 | Modulation Signal Measurement System (67GHz System)) | On PCB | 3,600 |
| On Wafer | 4,500 | ||
| ST-101 | S-Parameter, X-Parameter, RF IC, and Load-Pull Measurement System | On PCB | 2,100 |
| On Wafer | 3,000 | ||
| ST-102 | Antenna Measurement System | 1,500 | |
Customized RFICs
| No. | Equipment | Fee | |||
|---|---|---|---|---|---|
|
User Self-service (NTD/min) |
OEM Service (NTD/h) |
Note | |||
| HF-006 | Customized High-frequency Circuit Measurement System | below 67 GHz | 0.98 |
6,000
|
5,000
(Included in irregular measurements.)
|
| over 67 GHz | N/A |
7,000
|
|||
High Frequency Devices
| No. | Equipment | Fee | |||
|---|---|---|---|---|---|
|
User Self-service (NTD/s) |
OEM Service (NTD/h) |
Note | |||
| HF-003 | 67GHz S-parameter Measurement System | 0.7 |
5,500
|
5,000
(Included in irregular measurements.)
|
|
| HF-004 | High Frequency Noise Parameter Measurement System | 1-18 GHz | 0.84 |
6,000
|
|
| 18-65 GHz | N/A |
7,000
|
|||
| HF-005 | High Frequency Power Parameter Measurement System | 0.98 | 6,500 | ||
| HF-009 | 110 GHz S-Parameter Measurement System | N/A | 7,000 | ||
| HF-010 | Nonlinear Vector Network Analyzer Measurement System | N/A | 7,000 | ||
| HF-013 | Millimeter-wave Noise/Power Parameter Measurement System | N/A |
120 (NTD/min) |
||
| HF-014 | 220 GHz S-parameter Measurement System | N/A |
120 (NTD/min) |
||
| HF-015 | 110GHz Harmonic Load Pull Measurement System | N/A | 10,000 | ||
Nanoscale and Power Device Measurement
| No. | Equipment | Fee | |||
|---|---|---|---|---|---|
|
User Self-service (NTD/s) |
OEM Service (NTD/h) |
Note | |||
| HF-001 | Nano Device Parameter Measurement System | 0.36 | 5,000 |
5,000
(Included in irregular measurements.) |
|
| HF-007 | Low Frequency Noise Measurement System | 0.28 | 4,000 | ||
| HF-011 | IV&CV Electrical Measurement System | 0.2 | N/A | ||
| HF-012 | Power Device Measurement System | N/A |
85 (NTD/min) |
||